French catalogue
PDF · 108 pages · 5.8 MB
INDUSTRIAL STEELMAKING
Steel Plant Services & Industrial Maintenance
Spare parts, equipment and consumables for steel plants, continuous casting, rolling and auxiliary installations. COTI structures your procurement around technical references and delivery requirements.
17technical families386component familiesFR / ENbilingual support
Sourcing for this range is limited to products of North American or European origin. Manufacturing origin, traceability, references and conformity documentation are to be confirmed in each offer before ordering.
PRODUCTION AND FACILITIES
Supporting steel plant operations
Photographs of third-party facilities, shown for illustration.
Steel plant services
Services for every production stage
Normative references apply according to equipment, process and contract. They do not represent certification held by COTI; required documentation is specified in the offer.
Read / download the PDF cataloguesNo results. Try another term or contact COTI about your specific part.
A · 42 component families
Electric arc furnace — melting and charging
Critical parts and consumables for electric melting, charging, electrode regulation and furnace cooling circuits.
- Graphite electrodes — diameter, length, UHP/HP/RP grade
- Threaded electrode pins and sockets
- Furnace transformer and tap changer
- Furnace reactor and network compensation as applicable
- Conductive electrode support arms
View all 42 component families
Graphite electrodes — diameter, length, UHP/HP/RP gradeIEC 60239 (dimensions); IEC 60519-4 (installation)IEC 60239 · IEC 60519-4PDF details- Threaded electrode pins and socketsIEC 60239 (dimensions); IEC 60519-4 (installation)IEC 60239 · IEC 60519-4PDF details
- Furnace transformer and tap changerIEC 60076-1 according to category; specific specificationIEC 60076-1PDF details
- Furnace reactor and network compensation as applicableIEC 61000 (EMC, applicable part); electrical specificationelectromagnetic compatibilityPDF details
- Conductive electrode support armsIEC 60519-4 (assembly); EN 10204: 3.1 / 3.2 document as contractedIEC 60519-4 · EN 10204PDF details
- Electrode clamps, collars and contactsIEC 60519-4 (assembly); EN 10204: 3.1 / 3.2 document as contractedIEC 60519-4 · EN 10204PDF details
- Electrode lifting columns, masts and guidesIEC 60519-4 (assembly); EN 10204: 3.1 / 3.2 document as contractedIEC 60519-4 · EN 10204PDF details
Electrode lifting cylinders and hosesISO 4413 (system); EN 10204: 3.1 / 3.2 document as contracted for pressure-bearing metalISO 4413 · EN 10204PDF details- Water-cooled power cables and connectionsIEC 60519-4 (assembly); EN 10204: 3.1 / 3.2 document as contractedIEC 60519-4 · EN 10204PDF details
- Secondary busbars and connectionsIEC 60519-4 (assembly); EN 10204: 3.1 / 3.2 document as contractedIEC 60519-4 · EN 10204PDF details
- Upper shell and water-cooled panelsIEC 60519-4 (assembly); EN 10204: 3.1 / 3.2 document as contractedIEC 60519-4 · EN 10204PDF details
- Lower shell and furnace hearthIEC 60519-4 (assembly); EN 10204: 3.1 / 3.2 document as contractedIEC 60519-4 · EN 10204PDF details
- Sidewall and slagline bricksChemical/physical specification to be established; ISO 9001 (quality management)quality management, not product certificationPDF details
- Hearth ramming mixChemical/physical specification to be established; ISO 9001 (quality management)quality management, not product certificationPDF details
- Refractory roof, centre and electrode portsChemical/physical specification to be established; ISO 9001 (quality management)quality management, not product certificationPDF details
- Water-cooled roof panels and manifoldsIEC 60519-4 (assembly); EN 10204: 3.1 / 3.2 document as contractedIEC 60519-4 · EN 10204PDF details
- Roof joints and port sealsIEC 60519-4 (assembly); EN 10204: 3.1 / 3.2 document as contractedIEC 60519-4 · EN 10204PDF details
- Slag door, frames and mechanismIEC 60519-4 (assembly); EN 10204: 3.1 / 3.2 document as contractedIEC 60519-4 · EN 10204PDF details
- Gunning system — lance, hoses and nozzlesChemical/physical specification to be established; ISO 9001 (quality management)quality management, not product certificationPDF details
- Gunning mixes and repair compoundsChemical/physical specification to be established; ISO 9001 (quality management)quality management, not product certificationPDF details
- Oxy-fuel burners and mounting blocksEN ISO 13577-2 (assembly); EN 10204: 3.1 / 3.2 document as contracted for load-bearing metalEN ISO 13577-2 · EN 10204PDF details
- Oxygen injectors and lancesEN ISO 13577-2 (assembly); EN 10204: 3.1 / 3.2 document as contracted for load-bearing metalEN ISO 13577-2 · EN 10204PDF details
- Carbon injectors and injection pipesIEC 60519-4 (assembly); EN 10204: 3.1 / 3.2 document as contractedIEC 60519-4 · EN 10204PDF details
- Gas/oxygen trains, pressure regulation and safety devicesEN ISO 13577-2 (assembly); EN 10204: 3.1 / 3.2 document as contracted for load-bearing metalEN ISO 13577-2 · EN 10204PDF details
- Scrap baskets and bottom doorsDrawing and specification to be established; EN 10204: 3.1 / 3.2 document as contractedEN 10204PDF details
- Scrap grabs and gripping partsDrawing and specification to be established; EN 10204: 3.1 / 3.2 document as contractedEN 10204PDF details
- Lime, carbon and DRI hoppersASTM A36 or EN 10025-2 according to product; EN 10204: 3.1 / 3.2 document as contractedASTM material specifications · EN 10025-2 · EN 10204PDF details
Feeders, screws and raw-material load cellsProduct specification to be established; ISO 9001 (quality management)quality management, not product certificationPDF details- Continuous charging conveyors and chutesDrawing and specification to be established; EN 10204: 3.1 / 3.2 document as contractedEN 10204PDF details
- Tilting — cradles, trunnions and cylindersISO 4413 (system); EN 10204: 3.1 / 3.2 document as contracted for pressure-bearing metalISO 4413 · EN 10204PDF details
Roof swing/lift — shafts and bearingsIEC 60519-4 (assembly); EN 10204: 3.1 / 3.2 document as contractedIEC 60519-4 · EN 10204PDF details- Fourth-hole duct and cooled elbowsIEC 60519-4 (assembly); EN 10204: 3.1 / 3.2 document as contractedIEC 60519-4 · EN 10204PDF details
Fume sleeves, expansion joints and wear partsDrawing and specification to be established; EN 10204: 3.1 / 3.2 document as contractedEN 10204PDF details- EBT tapping blocks, sleeves and filler if installedChemical/physical specification to be established; ISO 9001 (quality management)quality management, not product certificationPDF details
- Tap-hole closure mechanismIEC 60519-4 (assembly); EN 10204: 3.1 / 3.2 document as contractedIEC 60519-4 · EN 10204PDF details
- Cooling-water manifolds and hosesASME B31.3 for piping; specify vessel code; EN 10204: 3.1 / 3.2 document as contractedASME B31.3 · EN 10204PDF details
- Water leak, flow and temperature detectionIEC 61000 (EMC, applicable part); electrical specificationelectromagnetic compatibilityPDF details
Immersion thermocouples and lance holdersProduct specification to be established; ISO 9001 (quality management)quality management, not product certificationPDF details- Steel samplers and oxygen probesProduct specification to be established; ISO 9001 (quality management)quality management, not product certificationPDF details
- Analysis spectrometer and maintenance partsEstablish test specification; ISO 9001 (quality management)quality management, not product certificationPDF details
- Off-gas analysers, probes and sample linesIEC 61000 (EMC, applicable part); electrical specificationelectromagnetic compatibilityPDF details
Position sensors and electrode regulationIEC 61000 (EMC, applicable part); electrical specificationelectromagnetic compatibilityPDF details
Prepare your request
Reference or drawing, quantities, service conditions, required documents and delivery date.
B · 25 component families
Ladles and secondary metallurgy
Ladle components, refractories, closure systems and ladle-furnace parts for molten-steel transfer and refining.
- Ladle body, shell and stiffeners
- Trunnions, rings, lifting yokes and attachments
- Ladle-specific hooks and lifting attachments
- Bottom and wall safety lining
- Bottom and wall working lining
View all 25 component families
- Ladle body, shell and stiffenersDrawing and specification to be established; EN 10204: 3.1 / 3.2 document as contractedEN 10204PDF details
- Trunnions, rings, lifting yokes and attachmentsDrawing and specification to be established; EN 10204: 3.1 / 3.2 document as contractedEN 10204PDF details
- Ladle-specific hooks and lifting attachmentsASME B30.10 according to hook; EN 10204: 3.1 / 3.2 document as contracted for load-bearing metalASME B30.10 · EN 10204PDF details
- Bottom and wall safety liningChemical/physical specification to be established; ISO 9001 (quality management)quality management, not product certificationPDF details
- Bottom and wall working liningChemical/physical specification to be established; ISO 9001 (quality management)quality management, not product certificationPDF details
- Slagline bricks and seating blocksChemical/physical specification to be established; ISO 9001 (quality management)quality management, not product certificationPDF details
- Repair mixes and jointing compoundsChemical/physical specification to be established; ISO 9001 (quality management)quality management, not product certificationPDF details
Bottom nozzles and collector nozzlesChemical/physical specification to be established; ISO 9001 (quality management)quality management, not product certificationPDF details
Slide-gate refractory platesChemical/physical specification to be established; ISO 9001 (quality management)quality management, not product certificationPDF details
Slide-gate frames, springs and mechanismDrawing and specification to be established; EN 10204: 3.1 / 3.2 document as contractedEN 10204PDF details- Ladle slide-gate cylinder and controlISO 4413 (system); EN 10204: 3.1 / 3.2 document as contracted for pressure-bearing metalISO 4413 · EN 10204PDF details
Stopper rods — where installedChemical/physical specification to be established; ISO 9001 (quality management)quality management, not product certificationPDF details- Porous plugs, blocks and argon connectionsChemical/physical specification to be established; ISO 9001 (quality management)quality management, not product certificationPDF details
Argon piping, hoses and regulationASME B31.3 for piping; specify vessel code; EN 10204: 3.1 / 3.2 document as contractedASME B31.3 · EN 10204PDF details- Slag detector and measuring elementsIEC 61000 (EMC, applicable part); electrical specificationelectromagnetic compatibilityPDF details
- Ladle tilting or turning mechanismDrawing and specification to be established; EN 10204: 3.1 / 3.2 document as contractedEN 10204PDF details
Ladle cars — wheels, axles and drivesDrawing and specification to be established; EN 10204: 3.1 / 3.2 document as contractedEN 10204PDF details- Ladle lid and preheaterEN ISO 13577-2 (assembly); EN 10204: 3.1 / 3.2 document as contracted for load-bearing metalEN ISO 13577-2 · EN 10204PDF details
- Preheater burners, ignition and refractoriesEN ISO 13577-2 (assembly); EN 10204: 3.1 / 3.2 document as contracted for load-bearing metalEN ISO 13577-2 · EN 10204PDF details
- Ladle furnace — transformer and reactorIEC 60076-1 according to category; specific specificationIEC 60076-1PDF details
- Ladle furnace — electrodes and pinsIEC 60239 (dimensions); IEC 60519-4 (installation)IEC 60239 · IEC 60519-4PDF details
- Ladle furnace — electrode arms, clamps and regulationIEC 60519-4 (assembly); EN 10204: 3.1 / 3.2 document as contractedIEC 60519-4 · EN 10204PDF details
- Ladle furnace — roof, cooling and fume extractionIEC 60519-4 (assembly); EN 10204: 3.1 / 3.2 document as contractedIEC 60519-4 · EN 10204PDF details
- Alloy feeders and wire-injection devicesProduct specification to be established; ISO 9001 (quality management)quality management, not product certificationPDF details
- Ladle weighing, temperature and samplingProduct specification to be established; ISO 9001 (quality management)quality management, not product certificationPDF details
Prepare your request
Reference or drawing, quantities, service conditions, required documents and delivery date.
C · 35 component families
Continuous billet casting — CCM
Mould components, rolls, oscillation, cooling and withdrawal parts matched to your continuous billet caster.
- Tundish — shell, lid and car
- Tundish linings, dams and weirs
- Submerged or open nozzles according to process
- Tundish stopper rods and slide gates according to design
- Tundish preheating — burners and accessories
View all 35 component families
- Tundish — shell, lid and carEN 14753 (assembly); EN 10204: 3.1 / 3.2 document as contractedEN 14753 · EN 10204PDF details
- Tundish linings, dams and weirsChemical/physical specification to be established; ISO 9001 (quality management)quality management, not product certificationPDF details
- Submerged or open nozzles according to processChemical/physical specification to be established; ISO 9001 (quality management)quality management, not product certificationPDF details
Tundish stopper rods and slide gates according to designEN 14753 (assembly); EN 10204: 3.1 / 3.2 document as contractedEN 14753 · EN 10204PDF details- Tundish preheating — burners and accessoriesEN ISO 13577-2 (assembly); EN 10204: 3.1 / 3.2 document as contracted for load-bearing metalEN ISO 13577-2 · EN 10204PDF details
Copper mould tubes — billet sectionEN 14753 (assembly); EN 10204: 3.1 / 3.2 document as contractedEN 14753 · EN 10204PDF details
Copper plates — only for a plate-mould designEN 14753 (assembly); EN 10204: 3.1 / 3.2 document as contractedEN 14753 · EN 10204PDF details- Sleeves, water jackets and mould housingsEN 14753 (assembly); EN 10204: 3.1 / 3.2 document as contractedEN 14753 · EN 10204PDF details
Mould coatings and treatmentsProduct specification to be established; ISO 9001 (quality management)quality management, not product certificationPDF details
Mould O-rings and sealsEN 14753 (assembly); EN 10204: 3.1 / 3.2 document as contractedEN 14753 · EN 10204PDF details- Mould oscillator — frame, shafts and guidesEN 14753 (assembly); EN 10204: 3.1 / 3.2 document as contractedEN 14753 · EN 10204PDF details
Oscillation cylinders, servo valves and accumulatorsISO 4413 (system); EN 10204: 3.1 / 3.2 document as contracted for pressure-bearing metalISO 4413 · EN 10204PDF details- Oscillator position sensorsIEC 61000 (EMC, applicable part); electrical specificationelectromagnetic compatibilityPDF details
- Mould level detection and controlIEC 61000 (EMC, applicable part); electrical specificationelectromagnetic compatibilityPDF details
- Primary cooling — manifolds and fittingsASME B31.3 for piping; specify vessel code; EN 10204: 3.1 / 3.2 document as contractedASME B31.3 · EN 10204PDF details
- Primary cooling — flowmeters and sensorsIEC 61000 (EMC, applicable part); electrical specificationelectromagnetic compatibilityPDF details
- Secondary cooling — nozzles and nozzle holdersEN 14753 (assembly); EN 10204: 3.1 / 3.2 document as contractedEN 14753 · EN 10204PDF details
- Spray headers, pipes and water filtersASME B31.3 for piping; specify vessel code; EN 10204: 3.1 / 3.2 document as contractedASME B31.3 · EN 10204PDF details
- Guide rolls and support segmentsEN 14753 (assembly); EN 10204: 3.1 / 3.2 document as contractedEN 14753 · EN 10204PDF details
- Roll shafts, bearings and bearing housingsISO 281 (calculation); EN 10204: 3.1 / 3.2 document as contracted for load-bearing materialISO 281 · EN 10204PDF details
- Bearing seals and scale guardsEN 14753 (assembly); EN 10204: 3.1 / 3.2 document as contractedEN 14753 · EN 10204PDF details
- Extraction — pinch rolls and drivesEN 14753 (assembly); EN 10204: 3.1 / 3.2 document as contractedEN 14753 · EN 10204PDF details
- Straightener — rolls, cylinders and guidesEN 14753 (assembly); EN 10204: 3.1 / 3.2 document as contractedEN 14753 · EN 10204PDF details
- Dummy bar — head, links and flexible sectionsEN 14753 (assembly); EN 10204: 3.1 / 3.2 document as contractedEN 14753 · EN 10204PDF details
- Dummy-bar storage and return systemEN 14753 (assembly); EN 10204: 3.1 / 3.2 document as contractedEN 14753 · EN 10204PDF details
Hot-cutting shear — where fittedEN 14753 (assembly); EN 10204: 3.1 / 3.2 document as contractedEN 14753 · EN 10204PDF details- Flame-cutting machine — where fittedEN ISO 13577-2 (assembly); EN 10204: 3.1 / 3.2 document as contracted for load-bearing metalEN ISO 13577-2 · EN 10204PDF details
- Shear blades, cutting heads and cutting consumablesEN 14753 (assembly); EN 10204: 3.1 / 3.2 document as contractedEN 14753 · EN 10204PDF details
- Billet roller tables, stops and transfer equipmentEN 14753 (assembly); EN 10204: 3.1 / 3.2 document as contractedEN 14753 · EN 10204PDF details
- Billet marking and identificationProduct specification to be established; ISO 9001 (quality management)quality management, not product certificationPDF details
- Electromagnetic stirrers — if installedIEC 61000 (EMC, applicable part); electrical specificationelectromagnetic compatibilityPDF details
- Mould lubrication/powder according to practiceProduct specification to be established; ISO 9001 (quality management)quality management, not product certificationPDF details
- Breakout detection and pyrometryIEC 61000 (EMC, applicable part); electrical specificationelectromagnetic compatibilityPDF details
- CCM hoses, quick couplings and hydraulic kitsISO 4413 (system); EN 10204: 3.1 / 3.2 document as contracted for pressure-bearing metalISO 4413 · EN 10204PDF details
- Guards, heat shields and maintenance accessEN 14753 (assembly); EN 10204: 3.1 / 3.2 document as contractedEN 14753 · EN 10204PDF details
Prepare your request
Reference or drawing, quantities, service conditions, required documents and delivery date.
D · 41 component families
Hot rolling mill — bars and wire rod
Rolls, guides, stands, drives and finishing parts for bar, rebar and wire-rod rolling mills.
- Reheating furnace — walking beam or pusher
- Burners, igniters and flame detectors
- Reheating roof, wall and hearth refractories
- Furnace skids, supports and insulation
- Furnace doors, pushers and discharge equipment
View all 41 component families
- Reheating furnace — walking beam or pusherEN ISO 13577-2 (assembly); EN 10204: 3.1 / 3.2 document as contracted for load-bearing metalEN ISO 13577-2 · EN 10204PDF details
- Burners, igniters and flame detectorsEN ISO 13577-2 (assembly); EN 10204: 3.1 / 3.2 document as contracted for load-bearing metalEN ISO 13577-2 · EN 10204PDF details
- Reheating roof, wall and hearth refractoriesChemical/physical specification to be established; ISO 9001 (quality management)quality management, not product certificationPDF details
- Furnace skids, supports and insulationDrawing and specification to be established; EN 10204: 3.1 / 3.2 document as contractedEN 10204PDF details
- Furnace doors, pushers and discharge equipmentEN 15949 (assembly); EN 10204: 3.1 / 3.2 document as contractedEN 15949 · EN 10204PDF details
- Combustion recuperators, ducts and expansion jointsEN ISO 13577-2 (assembly); EN 10204: 3.1 / 3.2 document as contracted for load-bearing metalEN ISO 13577-2 · EN 10204PDF details
- Horizontal and vertical stands — to suit architectureEN 15949 (assembly); EN 10204: 3.1 / 3.2 document as contractedEN 15949 · EN 10204PDF details
- Universal stands — only if installedEN 15949 (assembly); EN 10204: 3.1 / 3.2 document as contractedEN 15949 · EN 10204PDF details
- Work rolls — body, diameter and profileEN 15949 (assembly); EN 10204: 3.1 / 3.2 document as contractedEN 15949 · EN 10204PDF details
Backup rolls — not universal in bar millsEN 15949 (assembly); EN 10204: 3.1 / 3.2 document as contractedEN 15949 · EN 10204PDF details- Rolling rings — qualify materialEN 15949 (assembly); EN 10204: 3.1 / 3.2 document as contractedEN 15949 · EN 10204PDF details
- Roll bearing housings and chocksEN 15949 (assembly); EN 10204: 3.1 / 3.2 document as contractedEN 15949 · EN 10204PDF details
- Radial and thrust roll bearingsISO 281 (calculation); EN 10204: 3.1 / 3.2 document as contracted for load-bearing materialISO 281 · EN 10204PDF details
- Bearing seals and sealing ringsEN 15949 (assembly); EN 10204: 3.1 / 3.2 document as contractedEN 15949 · EN 10204PDF details
- Screwdown screws, nuts and roll-gap mechanismsEN 15949 (assembly); EN 10204: 3.1 / 3.2 document as contractedEN 15949 · EN 10204PDF details
- Clamping cylinders and stand-change devicesISO 4413 (system); EN 10204: 3.1 / 3.2 document as contracted for pressure-bearing metalISO 4413 · EN 10204PDF details
Cardan shafts, spindles and drive couplingsEN 15949 (assembly); EN 10204: 3.1 / 3.2 document as contractedEN 15949 · EN 10204PDF details
Gearboxes, pinion stands and internal partsEN 15949 (assembly); EN 10204: 3.1 / 3.2 document as contractedEN 15949 · EN 10204PDF details- Multi-stand wire rod finishing blocksEN 15949 (assembly); EN 10204: 3.1 / 3.2 document as contractedEN 15949 · EN 10204PDF details
Entry and exit guides — static and roller typesEN 15949 (assembly); EN 10204: 3.1 / 3.2 document as contractedEN 15949 · EN 10204PDF details
Guide rollers, shafts and bushesEN 15949 (assembly); EN 10204: 3.1 / 3.2 document as contractedEN 15949 · EN 10204PDF details- Guide boxes and adjustment devicesEN 15949 (assembly); EN 10204: 3.1 / 3.2 document as contractedEN 15949 · EN 10204PDF details
- Roll passes, grooves and roll-machining toolingEN 15949 (assembly); EN 10204: 3.1 / 3.2 document as contractedEN 15949 · EN 10204PDF details
- Slitting guides — for slit rollingEN 15949 (assembly); EN 10204: 3.1 / 3.2 document as contractedEN 15949 · EN 10204PDF details
- Pinch rolls and traction devicesEN 15949 (assembly); EN 10204: 3.1 / 3.2 document as contractedEN 15949 · EN 10204PDF details
- Crop and cobble shearsEN 15949 (assembly); EN 10204: 3.1 / 3.2 document as contractedEN 15949 · EN 10204PDF details
- Flying and rotary shearsEN 15949 (assembly); EN 10204: 3.1 / 3.2 document as contractedEN 15949 · EN 10204PDF details
- Blades, blade holders and cutting mechanismsEN 15949 (assembly); EN 10204: 3.1 / 3.2 document as contractedEN 15949 · EN 10204PDF details
- Runout roller tables and transfer guidesEN 15949 (assembly); EN 10204: 3.1 / 3.2 document as contractedEN 15949 · EN 10204PDF details
- Bar cooling bed — rakes, grids and mechanismsEN 15949 (assembly); EN 10204: 3.1 / 3.2 document as contractedEN 15949 · EN 10204PDF details
- Bar straightener — if fittedEN 15949 (assembly); EN 10204: 3.1 / 3.2 document as contractedEN 15949 · EN 10204PDF details
- Bar quenching/self-tempering system — boxes and tubesEN 15949 (assembly); EN 10204: 3.1 / 3.2 document as contractedEN 15949 · EN 10204PDF details
- Nozzles, inserts and roll coolingEN 15949 (assembly); EN 10204: 3.1 / 3.2 document as contractedEN 15949 · EN 10204PDF details
- Quench-water headers and controlASME B31.3 for piping; specify vessel code; EN 10204: 3.1 / 3.2 document as contractedASME B31.3 · EN 10204PDF details
- Laying head — wire rod onlyEN 15949 (assembly); EN 10204: 3.1 / 3.2 document as contractedEN 15949 · EN 10204PDF details
- Laying-head pipes and guide partsEN 15949 (assembly); EN 10204: 3.1 / 3.2 document as contractedEN 15949 · EN 10204PDF details
Ring-cooling conveyor and fansEN 15949 (assembly); EN 10204: 3.1 / 3.2 document as contractedEN 15949 · EN 10204PDF details- Coil reforming and coil handlingEN 15949 (assembly); EN 10204: 3.1 / 3.2 document as contractedEN 15949 · EN 10204PDF details
- Coiler — only where the line design includes oneEN 15949 (assembly); EN 10204: 3.1 / 3.2 document as contractedEN 15949 · EN 10204PDF details
- Strapping machine, coil compactor and accessoriesEN 15949 (assembly); EN 10204: 3.1 / 3.2 document as contractedEN 15949 · EN 10204PDF details
Speed, loop, dimension and temperature sensorsIEC 61000 (EMC, applicable part); electrical specificationelectromagnetic compatibilityPDF details
Prepare your request
Reference or drawing, quantities, service conditions, required documents and delivery date.
E · 10 component families
Descaling and high-pressure water
Pumps, nozzles, nozzle holders and high-pressure circuit components specified for flow, pressure and rolled product.
- Descaling pumps — validate the 100–200 bar range
- Pump impellers, shafts and internal parts
- Mechanical seals and seal kits
- Descaling nozzles and inserts
- Nozzle holders and spray headers
View all 10 component families
Descaling pumps — validate the 100–200 bar rangeHydraulic specification; API 610 for eligible service; EN 10204: 3.1 / 3.2 document as contractedAPI · EN 10204PDF details- Pump impellers, shafts and internal partsHydraulic specification; API 610 for eligible service; EN 10204: 3.1 / 3.2 document as contractedAPI · EN 10204PDF details
- Mechanical seals and seal kitsHydraulic specification; API 610 for eligible service; EN 10204: 3.1 / 3.2 document as contractedAPI · EN 10204PDF details
Descaling nozzles and insertsEN 15949 (assembly); EN 10204: 3.1 / 3.2 document as contractedEN 15949 · EN 10204PDF details- Nozzle holders and spray headersDrawing and specification to be established; EN 10204: 3.1 / 3.2 document as contractedEN 10204PDF details
High-pressure isolation and control valvesASME B16.34 according to type; API 598 by contract; EN 10204: 3.1 / 3.2 document as contractedASME B16 · API · EN 10204PDF details
High-pressure piping, flanges and fittingsASTM A53/A106 according to pipe; ASME B31.3; EN 10204: 3.1 / 3.2 document as contractedASTM material specifications · ASME B31.3 · EN 10204PDF details- High-pressure water filters and elementsASME B31.3 for piping; specify vessel code; EN 10204: 3.1 / 3.2 document as contractedASME B31.3 · EN 10204PDF details
Pulsation dampeners and accumulators if installedASME BPVC VIII or EN 13445 according to parent vessel; EN 10204: 3.1 / 3.2 document as contractedpressure vessels · unfired pressure vessels · EN 10204PDF details
Pressure, flow and temperature instrumentationIEC 61000 (EMC, applicable part); electrical specificationelectromagnetic compatibilityPDF details
Prepare your request
Reference or drawing, quantities, service conditions, required documents and delivery date.
F · 28 component families
Hydraulics, fluids and lubrication
Sourcing for power units, cylinders, servo valves, accumulators, filters and lubrication systems supporting production equipment.
- Hydraulic power units — reservoirs and frames
- Axial or radial piston pumps
- Gear and standby pumps
- Pump couplings and bell housings
- Electrohydraulic servo valves
View all 28 component families
Hydraulic power units — reservoirs and framesISO 4413 (system); EN 10204: 3.1 / 3.2 document as contracted for pressure-bearing metalISO 4413 · EN 10204PDF details- Axial or radial piston pumpsISO 4413 (system); EN 10204: 3.1 / 3.2 document as contracted for pressure-bearing metalISO 4413 · EN 10204PDF details
Gear and standby pumpsISO 4413 (system); EN 10204: 3.1 / 3.2 document as contracted for pressure-bearing metalISO 4413 · EN 10204PDF details- Pump couplings and bell housingsISO 4413 (system); EN 10204: 3.1 / 3.2 document as contracted for pressure-bearing metalISO 4413 · EN 10204PDF details
- Electrohydraulic servo valvesISO 4413 (system); EN 10204: 3.1 / 3.2 document as contracted for pressure-bearing metalISO 4413 · EN 10204PDF details
- Directional and proportional valvesISO 4413 (system); EN 10204: 3.1 / 3.2 document as contracted for pressure-bearing metalISO 4413 · EN 10204PDF details
- Pressure relief and flow control valvesISO 4413 (system); EN 10204: 3.1 / 3.2 document as contracted for pressure-bearing metalISO 4413 · EN 10204PDF details
- Drilled blocks, manifolds and cartridgesISO 4413 (system); EN 10204: 3.1 / 3.2 document as contracted for pressure-bearing metalISO 4413 · EN 10204PDF details
- Cylinders — barrels, rods, pistons and guidesISO 4413 (system); EN 10204: 3.1 / 3.2 document as contracted for pressure-bearing metalISO 4413 · EN 10204PDF details
- Cylinder seal and wiper kitsISO 4413 (system); EN 10204: 3.1 / 3.2 document as contracted for pressure-bearing metalISO 4413 · EN 10204PDF details
- Accumulators — bladders, diaphragms and valvesASME BPVC VIII or EN 13445 according to parent vessel; EN 10204: 3.1 / 3.2 document as contractedpressure vessels · unfired pressure vessels · EN 10204PDF details
- Hydraulic hoses, tubes and fittingsISO 4413 (system); EN 10204: 3.1 / 3.2 document as contracted for pressure-bearing metalISO 4413 · EN 10204PDF details
- Pressure filters and replacement elementsISO 16889 (element); ISO 4413 (circuit)ISO 16889 · ISO 4413PDF details
- Return filters and replacement elementsISO 16889 (element); ISO 4413 (circuit)ISO 16889 · ISO 4413PDF details
- Reservoir breathers and desiccantsProduct specification to be established; ISO 9001 (quality management)quality management, not product certificationPDF details
- Clogging indicators and ΔP sensorsIEC 61000 (EMC, applicable part); electrical specificationelectromagnetic compatibilityPDF details
Oil coolers and heat exchangersASME BPVC VIII or EN 13445 according to parent vessel; EN 10204: 3.1 / 3.2 document as contractedpressure vessels · unfired pressure vessels · EN 10204PDF details- Oil heaters, sensors and level controlsIEC 61000 (EMC, applicable part); electrical specificationelectromagnetic compatibilityPDF details
Hydraulic oils — specify viscosity and additivesProduct specification to be established; ISO 9001 (quality management)quality management, not product certificationPDF details- Fire-resistant fluids — qualify compatibilityProduct specification to be established; ISO 9001 (quality management)quality management, not product certificationPDF details
- Centralized lubrication pumpsProduct specification to be established; ISO 9001 (quality management)quality management, not product certificationPDF details
- Grease distributors, metering units and injectorsProduct specification to be established; ISO 9001 (quality management)quality management, not product certificationPDF details
- Automatic lubricators and cartridgesProduct specification to be established; ISO 9001 (quality management)quality management, not product certificationPDF details
- Lubrication pipes, fittings and hosesProduct specification to be established; ISO 9001 (quality management)quality management, not product certificationPDF details
- Bearing greases and gearbox lubricantsProduct specification to be established; ISO 9001 (quality management)quality management, not product certificationPDF details
- Rolling oils/emulsions — only where required by processProduct specification to be established; ISO 9001 (quality management)quality management, not product certificationPDF details
Prepare your request
Reference or drawing, quantities, service conditions, required documents and delivery date.
G · 14 component families
Compressed air and pneumatics
Compressors, dryers, air preparation, directional valves and cylinders for plant pneumatic networks and automation.
- Air compressors — screw or specified technology
- Compressor elements, belts and couplings
- Refrigerated or adsorption dryers
- Desiccants and dryer kits
- Air receivers and safety accessories
View all 14 component families
- Air compressors — screw or specified technologyProduct specification to be established; ISO 9001 (quality management)quality management, not product certificationPDF details
- Compressor elements, belts and couplingsProduct specification to be established; ISO 9001 (quality management)quality management, not product certificationPDF details
- Refrigerated or adsorption dryersProduct specification to be established; ISO 9001 (quality management)quality management, not product certificationPDF details
- Desiccants and dryer kitsProduct specification to be established; ISO 9001 (quality management)quality management, not product certificationPDF details
- Air receivers and safety accessoriesASME BPVC VIII or EN 13445 according to parent vessel; EN 10204: 3.1 / 3.2 document as contractedpressure vessels · unfired pressure vessels · EN 10204PDF details
Coalescing filters and condensate separatorsASME B31.3 for piping; specify vessel code; EN 10204: 3.1 / 3.2 document as contractedASME B31.3 · EN 10204PDF details- Pressure regulatorsISO 4414 (machine); EN 10204: 3.1 / 3.2 document as contracted for pressure-bearing metalISO 4414 · EN 10204PDF details
- Lubricators and FRL assembliesISO 4414 (machine); EN 10204: 3.1 / 3.2 document as contracted for pressure-bearing metalISO 4414 · EN 10204PDF details
- Pneumatic directional and solenoid valvesISO 4414 (machine); EN 10204: 3.1 / 3.2 document as contracted for pressure-bearing metalISO 4414 · EN 10204PDF details
Pneumatic cylinders and seal kitsISO 4414 (machine); EN 10204: 3.1 / 3.2 document as contracted for pressure-bearing metalISO 4414 · EN 10204PDF details
Hoses, tubing and quick couplingsISO 4414 (machine); EN 10204: 3.1 / 3.2 document as contracted for pressure-bearing metalISO 4414 · EN 10204PDF details- Automatic condensate drainsASME B31.3 for piping; specify vessel code; EN 10204: 3.1 / 3.2 document as contractedASME B31.3 · EN 10204PDF details
- Silencers and exhaust elementsISO 4414 (machine); EN 10204: 3.1 / 3.2 document as contracted for pressure-bearing metalISO 4414 · EN 10204PDF details
- Air-pressure gauges and sensorsIEC 61000 (EMC, applicable part); electrical specificationelectromagnetic compatibilityPDF details
Prepare your request
Reference or drawing, quantities, service conditions, required documents and delivery date.
H · 17 component families
Industrial valves and actuators
Isolation, control and safety valves, with actuators and maintenance kits matched to fluids and service conditions.
- Butterfly valves — wafer, lug or flanged to suit network
- Ball valves — full/reduced bore
- Check valves — dual-plate, piston or swing
- Gate valves — wedge type
- Knife-gate valves — distinct from wedge gate valves
View all 17 component families
Butterfly valves — wafer, lug or flanged to suit networkAPI 609; API 598 by contract; EN 10204: 3.1 / 3.2 document as contractedAPI · EN 10204PDF details
Ball valves — full/reduced boreASME B16.34; API 6D for pipeline service; EN 10204: 3.1 / 3.2 document as contractedASME B16 · API 6D · EN 10204PDF details
Check valves — dual-plate, piston or swingASME B16.34 according to type; API 598 by contract; EN 10204: 3.1 / 3.2 document as contractedASME B16 · API · EN 10204PDF details
Gate valves — wedge typeASME B16.34 according to type; API 598 by contract; EN 10204: 3.1 / 3.2 document as contractedASME B16 · API · EN 10204PDF details- Knife-gate valves — distinct from wedge gate valvesASME B16.34 according to type; API 598 by contract; EN 10204: 3.1 / 3.2 document as contractedASME B16 · API · EN 10204PDF details
Globe valves and throttling devicesASME B16.34 according to type; API 598 by contract; EN 10204: 3.1 / 3.2 document as contractedASME B16 · API · EN 10204PDF details- Control valves — bodies, trims and seatsASME B16.34 according to type; API 598 by contract; EN 10204: 3.1 / 3.2 document as contractedASME B16 · API · EN 10204PDF details
Safety and pressure-relief valvesASME BPVC VIII or EN 13445 according to parent vessel; EN 10204: 3.1 / 3.2 document as contractedpressure vessels · unfired pressure vessels · EN 10204PDF details- Gas valves and safety shut-off devicesEN ISO 13577-2 (assembly); EN 10204: 3.1 / 3.2 document as contracted for load-bearing metalEN ISO 13577-2 · EN 10204PDF details
- Oxygen-service valves — qualify cleanlinessASME B16.34 according to type; API 598 by contract; EN 10204: 3.1 / 3.2 document as contractedASME B16 · API · EN 10204PDF details
- Stainless-steel valve bodies — CF8M where specifiedASME B16.34 according to type; API 598 by contract; EN 10204: 3.1 / 3.2 document as contractedASME B16 · API · EN 10204PDF details
- Seats, discs, balls and closure elementsASME B16.34 according to type; API 598 by contract; EN 10204: 3.1 / 3.2 document as contractedASME B16 · API · EN 10204PDF details
- Stems, packing and stuffing boxesASME B16.34 according to type; API 598 by contract; EN 10204: 3.1 / 3.2 document as contractedASME B16 · API · EN 10204PDF details
- Pneumatic actuators and return springsISO 4414 (machine); EN 10204: 3.1 / 3.2 document as contracted for pressure-bearing metalISO 4414 · EN 10204PDF details
Electric actuators and gearboxesIEC 60034-1; Ex for classified zoneIEC 60034-1 · ATEX Directive 2014/34/EU · Ex equipment certificationPDF details- Positioners, limit switches and transmittersIEC 61000 (EMC, applicable part); electrical specificationelectromagnetic compatibilityPDF details
- Seal, gasket and mounting kitsASME B16.34 according to type; API 598 by contract; EN 10204: 3.1 / 3.2 document as contractedASME B16 · API · EN 10204PDF details
Prepare your request
Reference or drawing, quantities, service conditions, required documents and delivery date.
I · 15 component families
Machine and circuit filtration
Filter elements and accessories for hydraulic circuits, oils, fuels, compressed air and auxiliary equipment.
- Compressor intake air filters
- Engine and auxiliary-generator air filters
- Cabin and ventilation air filters
- Engine oil filters
- Gearbox and circulating-oil filters
View all 15 component families
- Compressor intake air filtersProduct specification to be established; ISO 9001 (quality management)quality management, not product certificationPDF details
- Engine and auxiliary-generator air filtersProduct specification to be established; ISO 9001 (quality management)quality management, not product certificationPDF details
Cabin and ventilation air filtersProduct specification to be established; ISO 9001 (quality management)quality management, not product certificationPDF details- Engine oil filtersProduct specification to be established; ISO 9001 (quality management)quality management, not product certificationPDF details
- Gearbox and circulating-oil filtersProduct specification to be established; ISO 9001 (quality management)quality management, not product certificationPDF details
Fuel filters and water/fuel separatorsProduct specification to be established; ISO 9001 (quality management)quality management, not product certificationPDF details- Compressor air/oil separatorsProduct specification to be established; ISO 9001 (quality management)quality management, not product certificationPDF details
- Condensate water/oil separatorsASME B31.3 for piping; specify vessel code; EN 10204: 3.1 / 3.2 document as contractedASME B31.3 · EN 10204PDF details
- Process-water filters — basket/cartridge to suit circuitASME B31.3 for piping; specify vessel code; EN 10204: 3.1 / 3.2 document as contractedASME B31.3 · EN 10204PDF details
- Duplex filters and changeover devicesASME B31.3 for piping; specify vessel code; EN 10204: 3.1 / 3.2 document as contractedASME B31.3 · EN 10204PDF details
- Filter housings, covers and boltingASME BPVC VIII or EN 13445 according to parent vessel; EN 10204: 3.1 / 3.2 document as contractedpressure vessels · unfired pressure vessels · EN 10204PDF details
- Filter seals, bypass kits and indicatorsISO 16889 (element); ISO 4413 (circuit)ISO 16889 · ISO 4413PDF details
Prepare your request
Reference or drawing, quantities, service conditions, required documents and delivery date.
J · 18 component families
Piping, structures and assemblies
Pipes, fittings, flanges, gaskets, fasteners and structures for industrial networks, repairs and installation work.
- ERW steel pipes — diameter, wall thickness and grade
- Seamless steel pipes — service and temperature
- Line pipe — API 5L only where specified
- Stainless-steel piping — establish grade/standard
- Forged ASME flanges and European PN flanges
View all 18 component families
ERW steel pipes — diameter, wall thickness and gradeASTM A53/A106 according to pipe; ASME B31.3; EN 10204: 3.1 / 3.2 document as contractedASTM material specifications · ASME B31.3 · EN 10204PDF details- Seamless steel pipes — service and temperatureASTM A53/A106 according to pipe; ASME B31.3; EN 10204: 3.1 / 3.2 document as contractedASTM material specifications · ASME B31.3 · EN 10204PDF details
- Line pipe — API 5L only where specifiedAPI 5L for line pipe; ASME B31.3; EN 10204: 3.1 / 3.2 document as contractedAPI programme product categories · ASME B31.3 · EN 10204PDF details
- Stainless-steel piping — establish grade/standardASME B31.3 for piping; specify vessel code; EN 10204: 3.1 / 3.2 document as contractedASME B31.3 · EN 10204PDF details
- Forged ASME flanges and European PN flangesASTM A105; ASME B16.5 or EN 1092-1; EN 10204: 3.1 / 3.2 document as contractedASTM material specifications · ASME B16 · EN 1092-1 · EN 10204PDF details
- Buttwelding elbows, tees and reducersASTM A234; ASME B16.9; EN 10204: 3.1 / 3.2 document as contractedASTM material specifications · ASME B16 · EN 10204PDF details
- Caps, end closures and branches to suit constructionASTM A234; ASME B16.9; EN 10204: 3.1 / 3.2 document as contractedASTM material specifications · ASME B16 · EN 10204PDF details
- Expansion joints, metal hoses and supportsASME B31.3 for piping; specify vessel code; EN 10204: 3.1 / 3.2 document as contractedASME B31.3 · EN 10204PDF details
- Spiral-wound gaskets and rings — to suit facingASME B16.20 (metallic) or B16.21 (non-metallic flat)ASME B16PDF details
High-pressure/temperature studs and boltsASTM A193/A194; EN 10204: 3.1 / 3.2 document as contracted; dimensions to suit assemblyASTM material specifications · EN 10204PDF details- Metric style 1 nuts — specify dimensions and classASME B18.2.4.1M (style 1 nut); specify material; EN 10204: 3.1 / 3.2 document as contractedtitle and scope · EN 10204PDF details
Washers, locking washers and fastenersDrawing and specification to be established; EN 10204: 3.1 / 3.2 document as contractedEN 10204PDF details
Structural I/H sections and anglesASTM A36 or EN 10025-2 according to product; EN 10204: 3.1 / 3.2 document as contractedASTM material specifications · EN 10025-2 · EN 10204PDF details- Structural sheets and platesASTM A36 or EN 10025-2 according to product; EN 10204: 3.1 / 3.2 document as contractedASTM material specifications · EN 10025-2 · EN 10204PDF details
- Structural hollow sections — confirm specific standardDrawing and specification to be established; EN 10204: 3.1 / 3.2 document as contractedEN 10204PDF details
- Grating, stairways and guardrailsASTM A36 or EN 10025-2 according to product; EN 10204: 3.1 / 3.2 document as contractedASTM material specifications · EN 10025-2 · EN 10204PDF details
- Wear plates and liners — grade to drawingDrawing and specification to be established; EN 10204: 3.1 / 3.2 document as contractedEN 10204PDF details
Prepare your request
Reference or drawing, quantities, service conditions, required documents and delivery date.
K · 32 component families
Electrical, automation and instrumentation
Motors, drives, PLCs, cables, protective devices and instrumentation to control, monitor and protect production lines.
- AC motors — power, cooling and duty
- DC motors — brushes, commutators and ventilation
- Motor bearings, seals and fans
- Variable frequency drives and power modules
- Rectifiers and DC drives
View all 32 component families
- AC motors — power, cooling and dutyIEC 60034-1; Ex for classified zoneIEC 60034-1 · ATEX Directive 2014/34/EU · Ex equipment certificationPDF details
- DC motors — brushes, commutators and ventilationIEC 60034-1; Ex for classified zoneIEC 60034-1 · ATEX Directive 2014/34/EU · Ex equipment certificationPDF details
- Motor bearings, seals and fansISO 281 (calculation); EN 10204: 3.1 / 3.2 document as contracted for load-bearing materialISO 281 · EN 10204PDF details
Variable frequency drives and power modulesIEC 61800-5-1; Ex where relevantIEC 61800-5-1 · ATEX Directive 2014/34/EU · Ex equipment certificationPDF details- Rectifiers and DC drivesIEC 61800-5-1; Ex where relevantIEC 61800-5-1 · ATEX Directive 2014/34/EU · Ex equipment certificationPDF details
- Control boards and communication modulesIEC 61000 (EMC, applicable part); electrical specificationelectromagnetic compatibilityPDF details
- Auxiliary transformersIEC 60076-1 according to category; specific specificationIEC 60076-1PDF details
Circuit breakers, contactors and isolatorsIEC 61000 (EMC, applicable part); electrical specificationelectromagnetic compatibilityPDF details
Fuses, relays and electrical protectionIEC 61000 (EMC, applicable part); electrical specificationelectromagnetic compatibilityPDF details- Power cables — copper/aluminium according to studyIEC 61000 (EMC, applicable part); electrical specificationelectromagnetic compatibilityPDF details
- Control, network and fibre-optic cablesIEC 61000 (EMC, applicable part); electrical specificationelectromagnetic compatibilityPDF details
Connectors, terminals, cable glands and cable traysIEC 61000 (EMC, applicable part); electrical specificationelectromagnetic compatibilityPDF details
Position/speed encoders and resolversIEC 61000 (EMC, applicable part); electrical specificationelectromagnetic compatibilityPDF details- Inductive/optical sensors and presence barriersIEC 61000 (EMC, applicable part); electrical specificationelectromagnetic compatibilityPDF details
- Pressure transmitters and gaugesIEC 61000 (EMC, applicable part); electrical specificationelectromagnetic compatibilityPDF details
- Thermocouples, resistance sensors and pyrometersProduct specification to be established; ISO 9001 (quality management)quality management, not product certificationPDF details
Level measurement — reservoir, tundish, mouldIEC 61000 (EMC, applicable part); electrical specificationelectromagnetic compatibilityPDF details- Flowmeters and flow switchesIEC 61000 (EMC, applicable part); electrical specificationelectromagnetic compatibilityPDF details
- Load cells and load instrumentationProduct specification to be established; ISO 9001 (quality management)quality management, not product certificationPDF details
- PLC/PAC systems — CPU and I/O modulesIEC 61131-2 (function/EMC); qualify safety requirementsIEC 61131-2PDF details
Racks, power supplies and backup batteriesIEC 61131-2 (function/EMC); qualify safety requirementsIEC 61131-2PDF details- HMIs, industrial displays and operator stationsIEC 61000 (EMC, applicable part); electrical specificationelectromagnetic compatibilityPDF details
- Control cabinets and panelsIEC 61000 (EMC, applicable part); electrical specificationelectromagnetic compatibilityPDF details
- Cabinet ventilation and air conditioningIEC 61000 (EMC, applicable part); electrical specificationelectromagnetic compatibilityPDF details
Industrial networks, switches and gatewaysIEC 61000 (EMC, applicable part); electrical specificationelectromagnetic compatibilityPDF details- Uninterruptible supplies and UPS systemsIEC 61000 (EMC, applicable part); electrical specificationelectromagnetic compatibilityPDF details
Emergency-stop chains and interlocksProduct specification to be established; ISO 9001 (quality management)quality management, not product certificationPDF details- Safety modules — determine required safety levelProduct specification to be established; ISO 9001 (quality management)quality management, not product certificationPDF details
- Bearing vibration, speed and temperature sensorsProduct specification to be established; ISO 9001 (quality management)quality management, not product certificationPDF details
- Ex equipment — only for classified zonesIEC 61000 (EMC, applicable part); electrical specificationelectromagnetic compatibilityPDF details
- Earthing, equipotential bonding and connectionsIEC 61000 (EMC, applicable part); electrical specificationelectromagnetic compatibilityPDF details
- Power-drive cooling componentsIEC 61800-5-1; Ex where relevantIEC 61800-5-1 · ATEX Directive 2014/34/EU · Ex equipment certificationPDF details
Prepare your request
Reference or drawing, quantities, service conditions, required documents and delivery date.
L · 21 component families
Dedusting, water and environmental management
Fume-extraction parts, bag filters, fans and water-treatment components for plant environmental systems.
- Primary furnace fume extraction
- Secondary hoods and extraction ducts
- Ducts, elbows, expansion joints and liners
- Bag filters — housings and chambers
- Filter bags and media to suit temperature
View all 21 component families
- Primary furnace fume extractionDrawing and specification to be established; EN 10204: 3.1 / 3.2 document as contractedEN 10204PDF details
- Secondary hoods and extraction ductsASTM A36 or EN 10025-2 according to product; EN 10204: 3.1 / 3.2 document as contractedASTM material specifications · EN 10025-2 · EN 10204PDF details
- Ducts, elbows, expansion joints and linersDrawing and specification to be established; EN 10204: 3.1 / 3.2 document as contractedEN 10204PDF details
- Bag filters — housings and chambersASTM A36 or EN 10025-2 according to product; EN 10204: 3.1 / 3.2 document as contractedASTM material specifications · EN 10025-2 · EN 10204PDF details
- Filter bags and media to suit temperatureProduct specification to be established; ISO 9001 (quality management)quality management, not product certificationPDF details
- Bag cages/supports and mountingDrawing and specification to be established; EN 10204: 3.1 / 3.2 document as contractedEN 10204PDF details
- Pulse-cleaning valves, diaphragms and solenoidsISO 4414 (machine); EN 10204: 3.1 / 3.2 document as contracted for pressure-bearing metalISO 4414 · EN 10204PDF details
- Pulse-air receivers and fittingsASME BPVC VIII or EN 13445 according to parent vessel; EN 10204: 3.1 / 3.2 document as contractedpressure vessels · unfired pressure vessels · EN 10204PDF details
- Electrostatic precipitators — only if installedIEC 61000 (EMC, applicable part); electrical specificationelectromagnetic compatibilityPDF details
- Centrifugal fans — impellers, shafts and casingsDrawing and specification to be established; EN 10204: 3.1 / 3.2 document as contractedEN 10204PDF details
- Fan bearings, couplings and motorsISO 281 (calculation); EN 10204: 3.1 / 3.2 document as contracted for load-bearing materialISO 281 · EN 10204PDF details
- Fume dampers, flaps and actuatorsDrawing and specification to be established; EN 10204: 3.1 / 3.2 document as contractedEN 10204PDF details
- Fire dampers — confirm classificationProduct specification to be established; ISO 9001 (quality management)quality management, not product certificationPDF details
Dust hoppers, screws and rotary airlocksDrawing and specification to be established; EN 10204: 3.1 / 3.2 document as contractedEN 10204PDF details- Pneumatic dust conveying and loadingASME B31.3 for piping; specify vessel code; EN 10204: 3.1 / 3.2 document as contractedASME B31.3 · EN 10204PDF details
- Lime injection — only if required by treatment processProduct specification to be established; ISO 9001 (quality management)quality management, not product certificationPDF details
- ΔP, temperature and emission sensorsIEC 61000 (EMC, applicable part); electrical specificationelectromagnetic compatibilityPDF details
- Scale pits, pumps and scrapersASME B31.3 for piping; specify vessel code; EN 10204: 3.1 / 3.2 document as contractedASME B31.3 · EN 10204PDF details
- Settling, filtration and water recyclingASME B31.3 for piping; specify vessel code; EN 10204: 3.1 / 3.2 document as contractedASME B31.3 · EN 10204PDF details
- Slag pots, containers and handling accessoriesDrawing and specification to be established; EN 10204: 3.1 / 3.2 document as contractedEN 10204PDF details
- Slag crushing, screening and metal recoveryDrawing and specification to be established; EN 10204: 3.1 / 3.2 document as contractedEN 10204PDF details
Prepare your request
Reference or drawing, quantities, service conditions, required documents and delivery date.
M · 22 component families
Raw materials and metallurgical consumables
Iron ore and pellets, DRI/HBI, scrap, fluxes, ferroalloys and metallurgical consumables, according to the process route and buyer specifications.
- Steel scrap — classes, cleanliness and dimensions
- DRI — composition, metallization and fines
- HBI — only where used as feedstock
- Iron ore/pellets — for an integrated DRI route
- Quicklime — CaO content and reactivity
View all 22 component families
Steel scrap — classes, cleanliness and dimensionsProduct specification to be established; ISO 9001 (quality management)quality management, not product certificationPDF details- DRI — composition, metallization and finesProduct specification to be established; ISO 9001 (quality management)quality management, not product certificationPDF details
HBI — only where used as feedstockProduct specification to be established; ISO 9001 (quality management)quality management, not product certificationPDF details- Iron ore/pellets — for an integrated DRI routeProduct specification to be established; ISO 9001 (quality management)quality management, not product certificationPDF details
Quicklime — CaO content and reactivityProduct specification to be established; ISO 9001 (quality management)quality management, not product certificationPDF details
Dolomite/calcined dolomite — analysis and moistureProduct specification to be established; ISO 9001 (quality management)quality management, not product certificationPDF details
Carburizing carbon and injection carbonProduct specification to be established; ISO 9001 (quality management)quality management, not product certificationPDF details
Ferrosilicon — FeSi to suit melt recipeProduct specification to be established; ISO 9001 (quality management)quality management, not product certificationPDF details
Ferromanganese — FeMn to suit melt recipeProduct specification to be established; ISO 9001 (quality management)quality management, not product certificationPDF details
Ferrovanadium — FeV for the steel grade producedProduct specification to be established; ISO 9001 (quality management)quality management, not product certificationPDF details- Ferroniobium — FeNb for the steel grade producedProduct specification to be established; ISO 9001 (quality management)quality management, not product certificationPDF details
- Other ferroalloys — only to a qualified melt recipeProduct specification to be established; ISO 9001 (quality management)quality management, not product certificationPDF details
- Deoxidizers and slag conditionersProduct specification to be established; ISO 9001 (quality management)quality management, not product certificationPDF details
- Lime-based ladle desulfurizersProduct specification to be established; ISO 9001 (quality management)quality management, not product certificationPDF details
- Calcium aluminates and specified fluxesProduct specification to be established; ISO 9001 (quality management)quality management, not product certificationPDF details
- Process oxygen — purity and pressureProduct specification to be established; ISO 9001 (quality management)quality management, not product certificationPDF details
- Stirring argon — purity and distributionProduct specification to be established; ISO 9001 (quality management)quality management, not product certificationPDF details
Process nitrogen — confirm useProduct specification to be established; ISO 9001 (quality management)quality management, not product certificationPDF details- Acetylene/cutting gas — to suit maintenance stationProduct specification to be established; ISO 9001 (quality management)quality management, not product certificationPDF details
- Refractory consumables — mixes, coatings and jointingChemical/physical specification to be established; ISO 9001 (quality management)quality management, not product certificationPDF details
- Casting powders, oils and agents — qualify practiceProduct specification to be established; ISO 9001 (quality management)quality management, not product certificationPDF details
- Cored wires and treatment alloys — where practice requiresProduct specification to be established; ISO 9001 (quality management)quality management, not product certificationPDF details
Prepare your request
Reference or drawing, quantities, service conditions, required documents and delivery date.
N · 18 component families
Integrated direct reduction — additional equipment
Additional direct-reduction equipment for plants using this route, according to installed technology and equipment documentation.
- Ore/pellet handling — conveyors and chutes
- Screens, sieves and fines-separation parts
- Hoppers, feeders and charging valves
- Shaft furnace — shell and drawing-specific elements
- Shaft furnace refractories and anchors
View all 18 component families
- Ore/pellet handling — conveyors and chutesDrawing and specification to be established; EN 10204: 3.1 / 3.2 document as contractedEN 10204PDF details
- Screens, sieves and fines-separation partsDrawing and specification to be established; EN 10204: 3.1 / 3.2 document as contractedEN 10204PDF details
- Hoppers, feeders and charging valvesDrawing and specification to be established; EN 10204: 3.1 / 3.2 document as contractedEN 10204PDF details
- Shaft furnace — shell and drawing-specific elementsDrawing and specification to be established; EN 10204: 3.1 / 3.2 document as contractedEN 10204PDF details
- Shaft furnace refractories and anchorsChemical/physical specification to be established; ISO 9001 (quality management)quality management, not product certificationPDF details
- Gas reforming — tubes and elements where technology includes itDrawing and specification to be established; EN 10204: 3.1 / 3.2 document as contractedEN 10204PDF details
- Catalyst — only if a reformer is installedProduct specification to be established; ISO 9001 (quality management)quality management, not product certificationPDF details
- Process-gas compressors/blowersProduct specification to be established; ISO 9001 (quality management)quality management, not product certificationPDF details
- Gas coolers, heat exchangers and separatorsASME BPVC VIII or EN 13445 according to parent vessel; EN 10204: 3.1 / 3.2 document as contractedpressure vessels · unfired pressure vessels · EN 10204PDF details
- Gas scrubbing/filtration — equipment and mediaASME B31.3 for piping; specify vessel code; EN 10204: 3.1 / 3.2 document as contractedASME B31.3 · EN 10204PDF details
- Reducing-gas pipes and valvesASME B31.3 for piping; specify vessel code; EN 10204: 3.1 / 3.2 document as contractedASME B31.3 · EN 10204PDF details
- DRI discharge — valves, wheels and mechanismsDrawing and specification to be established; EN 10204: 3.1 / 3.2 document as contractedEN 10204PDF details
- Hot DRI transport — only if installedDrawing and specification to be established; EN 10204: 3.1 / 3.2 document as contractedEN 10204PDF details
- DRI cooling and storageASME B31.3 for piping; specify vessel code; EN 10204: 3.1 / 3.2 document as contractedASME B31.3 · EN 10204PDF details
- HBI briquetting — only for an equipped installationDrawing and specification to be established; EN 10204: 3.1 / 3.2 document as contractedEN 10204PDF details
- Gas analysis and leak detectionIEC 61000 (EMC, applicable part); electrical specificationelectromagnetic compatibilityPDF details
- Pressure, temperature and composition instrumentationIEC 61000 (EMC, applicable part); electrical specificationelectromagnetic compatibilityPDF details
- Gas safety, purging and inertingProduct specification to be established; ISO 9001 (quality management)quality management, not product certificationPDF details
Prepare your request
Reference or drawing, quantities, service conditions, required documents and delivery date.
O · 15 component families
Cooling, energy and distribution utilities
Cooling, heat-transfer, energy-distribution and utility parts supporting production equipment availability.
- Cooling-water and standby pumps
- Water/water and water/oil heat exchangers
- Cooling towers — fill and drift eliminators
- Tower fans, gearboxes and drives
- Cooling tanks, headers and valves
View all 15 component families
- Cooling-water and standby pumpsHydraulic specification; API 610 for eligible service; EN 10204: 3.1 / 3.2 document as contractedAPI · EN 10204PDF details
- Water/water and water/oil heat exchangersASME BPVC VIII or EN 13445 according to parent vessel; EN 10204: 3.1 / 3.2 document as contractedpressure vessels · unfired pressure vessels · EN 10204PDF details
- Cooling towers — fill and drift eliminatorsProduct specification to be established; ISO 9001 (quality management)quality management, not product certificationPDF details
- Tower fans, gearboxes and drivesDrawing and specification to be established; EN 10204: 3.1 / 3.2 document as contractedEN 10204PDF details
- Cooling tanks, headers and valvesASME B31.3 for piping; specify vessel code; EN 10204: 3.1 / 3.2 document as contractedASME B31.3 · EN 10204PDF details
- Water treatment — filters, media and dosingASME B31.3 for piping; specify vessel code; EN 10204: 3.1 / 3.2 document as contractedASME B31.3 · EN 10204PDF details
- Chemical dosing pumps and accessoriesProduct specification to be established; ISO 9001 (quality management)quality management, not product certificationPDF details
- Heat-exchanger gaskets, tubes and platesASME BPVC VIII or EN 13445 according to parent vessel; EN 10204: 3.1 / 3.2 document as contractedpressure vessels · unfired pressure vessels · EN 10204PDF details
- Tanks and pressure vesselsASME BPVC VIII or EN 13445 according to parent vessel; EN 10204: 3.1 / 3.2 document as contractedpressure vessels · unfired pressure vessels · EN 10204PDF details
- Industrial water, air and gas networksASME B31.3 for piping; specify vessel code; EN 10204: 3.1 / 3.2 document as contractedASME B31.3 · EN 10204PDF details
- Boiler — only if steam is installedASME BPVC I or IV according to boiler; EN 10204: 3.1 / 3.2 document as contractedboilers, examination and qualifications · EN 10204PDF details
- Generator sets and engine maintenanceIEC 60034-1; Ex for classified zoneIEC 60034-1 · ATEX Directive 2014/34/EU · Ex equipment certificationPDF details
- Firewater pumps, valves and accessoriesProduct specification to be established; ISO 9001 (quality management)quality management, not product certificationPDF details
- Electrical distribution and substation coolingIEC 61000 (EMC, applicable part); electrical specificationelectromagnetic compatibilityPDF details
- Drainage networks and lift pumpsASME B31.3 for piping; specify vessel code; EN 10204: 3.1 / 3.2 document as contractedASME B31.3 · EN 10204PDF details
Prepare your request
Reference or drawing, quantities, service conditions, required documents and delivery date.
P · 14 component families
Finishing, quality control and packaging
Finishing, testing, measurement, tying and packaging equipment for product inspection and shipment preparation.
- Cut-to-length shearing and measuring stops
- Bar collecting, counting and alignment
- Bundling, strapping and bundle tying
- Tying wire, strapping and ties
- Bundle and coil weighing
View all 14 component families
- Cut-to-length shearing and measuring stopsEN 15949 (assembly); EN 10204: 3.1 / 3.2 document as contractedEN 15949 · EN 10204PDF details
- Bar collecting, counting and alignmentEN 15949 (assembly); EN 10204: 3.1 / 3.2 document as contractedEN 15949 · EN 10204PDF details
- Bundling, strapping and bundle tyingEN 15949 (assembly); EN 10204: 3.1 / 3.2 document as contractedEN 15949 · EN 10204PDF details
- Tying wire, strapping and tiesProduct specification to be established; ISO 9001 (quality management)quality management, not product certificationPDF details
- Bundle and coil weighingProduct specification to be established; ISO 9001 (quality management)quality management, not product certificationPDF details
- Marking, labelling and batch traceabilityProduct specification to be established; ISO 9001 (quality management)quality management, not product certificationPDF details
- Coil compacting and guide partsEN 15949 (assembly); EN 10204: 3.1 / 3.2 document as contractedEN 15949 · EN 10204PDF details
- Finished-product hooks, pallets and transportDrawing and specification to be established; EN 10204: 3.1 / 3.2 document as contractedEN 10204PDF details
Tensile tests — grips, extensometers and accessoriesISO 15630-1 (mechanical tests); product to contractISO 15630-1PDF details- Bend/rebend tests — mandrels and toolingISO 15630-1 (mechanical tests); product to contractISO 15630-1PDF details
- Diameter, linear mass and rib geometry measurementASTM A615/A706 according to product and contractASTM material specificationsPDF details
Sample preparation and laboratory consumablesEstablish test specification; ISO 9001 (quality management)quality management, not product certificationPDF details- Standards, check samples and spectrometer consumablesEstablish test specification; ISO 9001 (quality management)quality management, not product certificationPDF details
- Non-destructive testing — where required by product/contractASME BPVC V for relevant construction; specify testsboilers, examination and qualificationsPDF details
Prepare your request
Reference or drawing, quantities, service conditions, required documents and delivery date.
Q · 19 component families
Mechanical maintenance, lifting and workshop
Mechanical parts, lifting accessories, tools and workshop consumables for routine interventions and planned shutdowns.
- Bearings — radial, thrust and heavy-duty
- Bearing housings, rings, bushes and plain bearings
- Gears, shafts and gearbox parts
- Couplings, cardan shafts and flexible elements
- Belts, chains, pulleys and sprockets
View all 19 component families
- Bearings — radial, thrust and heavy-dutyISO 281 (calculation); EN 10204: 3.1 / 3.2 document as contracted for load-bearing materialISO 281 · EN 10204PDF details
- Bearing housings, rings, bushes and plain bearingsDrawing and specification to be established; EN 10204: 3.1 / 3.2 document as contractedEN 10204PDF details
- Gears, shafts and gearbox partsDrawing and specification to be established; EN 10204: 3.1 / 3.2 document as contractedEN 10204PDF details
Couplings, cardan shafts and flexible elementsDrawing and specification to be established; EN 10204: 3.1 / 3.2 document as contractedEN 10204PDF details
Belts, chains, pulleys and sprocketsProduct specification to be established; ISO 9001 (quality management)quality management, not product certificationPDF details- Brakes, linings and braking actuatorsDrawing and specification to be established; EN 10204: 3.1 / 3.2 document as contractedEN 10204PDF details
- Overhead cranes — wheels, axles and mechanisms to drawingDrawing and specification to be established; EN 10204: 3.1 / 3.2 document as contractedEN 10204PDF details
- Winches, hoists and lifting gearboxesDrawing and specification to be established; EN 10204: 3.1 / 3.2 document as contractedEN 10204PDF details
Steel ropes, sheaves and lifting drumsDrawing and specification to be established; EN 10204: 3.1 / 3.2 document as contractedEN 10204PDF details
Hooks, slings and certifiable lifting accessoriesASME B30.9/B30.10 according to accessory; EN 10204: 3.1 / 3.2 document as contracted if metallicASME B30.9 · ASME B30.10 · EN 10204PDF details- Seals, wipers and mechanical sealing kitsProduct specification to be established; ISO 9001 (quality management)quality management, not product certificationPDF details
- Wear-resistant plates and repair elementsDrawing and specification to be established; EN 10204: 3.1 / 3.2 document as contractedEN 10204PDF details
Welding/hardfacing electrodes and wiresASME BPVC IX for relevant construction; ISO 9001 (quality management)boilers, examination and qualifications · quality management, not product certificationPDF details
Welding torches, nozzles and machine partsASME BPVC IX for relevant construction; ISO 9001 (quality management)boilers, examination and qualifications · quality management, not product certificationPDF details- Machining, grinding and drilling toolingProduct specification to be established; ISO 9001 (quality management)quality management, not product certificationPDF details
- Alignment and vibration-checking equipmentEstablish test specification; ISO 9001 (quality management)quality management, not product certificationPDF details
- Bearing removal, installation and heating equipmentProduct specification to be established; ISO 9001 (quality management)quality management, not product certificationPDF details
Maintenance guard and lockout componentsProduct specification to be established; ISO 9001 (quality management)quality management, not product certificationPDF details- Cleaning, preservation and corrosion-protection productsProduct specification to be established; ISO 9001 (quality management)quality management, not product certificationPDF details
Prepare your request
Reference or drawing, quantities, service conditions, required documents and delivery date.
ADDITIONAL PROCESS ROUTES
Hot-strip and cold-rolling services
Work and backup rolls, heavy-duty bearings, descaling nozzles, high-pressure pumps and shear blades. For cold rolling: precision rolls, radiant tubes, annealing rolls, hydraulic servo valves and coolant filtration. Supply is matched to the installed line and distinguished from rebar-mill equipment.
Request a quotationA structured sourcing process
Qualification
Equipment, reference, drawing, quantities, operating conditions and required lead time.
Sourcing & comparison
Supplier identification and comparison of offers against the specification.
Document review
Datasheets, material certificates, tests and inspection according to agreed requirements.
Logistics & follow-up
Packaging, freight, documentation coordination and delivery tracking under the accepted offer.
Requirements matched to your production route
Direct reduction, electric melting, continuous casting and rolling require different parts. Long-product plants, hot-strip mills and cold-rolling mills do not all use the same configuration: we start with your installed equipment, not a universal parts list.
Parts and consumables based on manufacturer documentation : Primetals Technologies · Midrex Global Solutions. Independent technical references; no affiliation is claimed.
Steel products: complementary supply on request
Rebar, wire rod, billets and other steel products remain available in a secondary section. They support project works without replacing our presentation of services for industrial plants.
View steel products and technical sheets
Relevant certificates and conformity documents are requested according to the product, validity and buyer requirements. Site visits or verification can be coordinated subject to the relevant site's approval.
Real, illustrative photograph. Third-party facilities and people; no affiliation with COTI is claimed.